The Alerta MoveAssist 200 is a transfer assist unit which makes transfer functions of all types quick and easy, requiring minimal caregiver assistance. The Alerta MoveAssist promotes user engagement and enhances mobility. Each unit is equipped with a crossbar which users can grasp and pull themself up into a standing position using their own strength. The padded split seats swing out allowing the user to stand up and board the unit. The caregiver then flips the split seats back into place to form a secure and comfortable seat for the user to sit on for the remainder of the transfer. A user who qualifies to use the Alerta MoveAssist must have enough leg and lower body strength to stand up and remain in the standing/sitting position. Adequate arm strength is required if the user must use the crossbar. Users who satisfy these criteria and have difficulty walking or present a potential for falling down will find the Alerta MoveAssist a useful and safe transfer device. For users who lack these requirements, a stand aid hoist is recommended.

Alerta Slide Sheets boast superior slide performance properties and are designed to facilitate nurses and carers with safe assisted repositioning and transfer of patients on a support surface. Alerta Slide Sheets are tubular, reusable, and available in 5 convenient sizes. They are manufactured from a very strong highly durable quality fabric which creates an extremely low friction surface providing superior sliding performance during patient repositioning and transfers whilst protecting against skin sheer. Alerta Slide Sheets are not intended for use to lift patients. Fitted with a brightly coloured hanging loop allowing the sheet to be conveniently stored near the user. - Brightly coloured hanging loop - Superior slide performance  - Wash at a maximum of 80ºC - Do NOT use fabric softener or chlorine - Slip hazard; Do not leave on the floor - Tubular and reusable 

The  Rotate-Stand-Up Bed is a powered rotation bed to support users with unassisted transfers between lying in bed and standing, providing enhanced freedom, safety and care for the user. The user can independently control the bed with the handset to transition from lying in bed to the seated position, and then rotating and standing up from the bed. The hand rails provide additional safety and assurance for the user when rotating and transferring in or out of the bed. It has a 3 year warranty on the bed frame and 2 years on the motors and electrics. The bed can be dismantled for storage or transporting and is available in Oak wood finish. The Rotate bed also features a battery back-up ensuring the bed never gets stuck in a sitting position in the event of a power cut.

The hospital bed floor bed  is a unique ultra-low bed for pioneering user safety and care. It has all the features of the hospital Low bed and comes with the added benefit of its range going down to just 9cm from the ground, and auto regression backrest. This facilitates the most specific and complex care requirements, while also reducing impact if the user rolls out of the bed. It has a 3 year warranty on the bed frame and 2 years on the motors and electrics. The bed can be dismantled for storage or transporting and is available in Oak and Walnut wood finish.

The Alerta SensaGel Heel Slope Mattress is a very high risk profiling memory foam mattress built with a high density base, memory foam top, and a sloping heel section with gel memory foam. Heel slope: assists pressure redistribution by alleviating pressure from the high risk heel area. SensaGel® heel section: gel-infused memory foam to prevent pressure sores on the heel. The mattress is designed with a section of v-cut base foam which creates additional air movement for enhanced pressure relieving properties, providing effective comfort, care and pressure redistribution for users in hospital, nursing and care home environments. To launder the cover in a washing machine, set the main wash to 65oC for no less than 10 minutes or 95oC for no less than 3 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60oC. The foam can be autoclaved at 134oC.

The Alerta Sensaflex 4000 is a very high risk profiling memory foam mattress built with a high density base, foam centre and a castellated gel memory foam top. The mattress is designed with a section of v-cut memory foam which creates additional air movement for enhanced pressure relieving properties, providing effective comfort, care and pressure redistribution for users in hospital, nursing and care home environments. To launder the cover in a washing machine, set the main wash to 65oC for no less than 10 minutes or 95oC for no less than 3 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60oC. The foam can be autoclaved at 134oC.

The Alerta Sensaflex 3000 is a high risk profiling memory foam mattress. The sophisticated mattress design provides effective comfort, care and pressure redistribution for users in hospital, nursing and care home environments. To launder the cover in a washing machine, set the main wash to 65oC for no less than 10 minutes or 95oC for no less than 3 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60oC. The foam can be autoclaved at 134oC. A bariatric 120cm wide version is available - code: ALT-3000/4.

The Alerta Sensaflex 500 is a medium risk profiling foam mattress built with castellated foam. The sophisticated mattress design provides effective comfort, care and pressure redistribution for users in hospital, nursing and care home environments. To launder the cover in a washing machine, set the main wash to 65oC for no less than 10 minutes or 95oC for no less than 3 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60oC. The foam can be autoclaved at 134oC.

The Alerta Sensaflex Underlay 2 inch Foam Mattress is for use underneath an air mattress system in the event of power failure or the use of CPR. The underlay provides effective comfort and care for users in hospital, nursing and care home environments. To launder the cover in a washing machine, set the main wash to 65oC for no less than 10 minutes or 95oC for no less than 3 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60oC. The foam can be autoclaved at 134oC.

The Aspire Vida is a super lightweight transport wheelchair ideal for quick trips to the shops, appointments and catching up with friends. Ergonomic backrest and seat shape follow the contours of the user to maximise comfort and postural support. The 135kg safe working load caters to a broad range of users. Lightweight frame design ensures easy lifting in and out of cars, ideal for carers. Contoured and padded seating improves comfort and postural support. Attendant operated hand brakes with parking lock. Simple and intuitive folding for easy transportation. Removable leg rests and folding back for compact storage. Rear storage pocket for essentials. Available as attendant propelled or self-propelled. Anterior Seat Height - 495 mm Posterior Seat Height - 445 mm

The Aspire Vida is a super lightweight transport wheelchair ideal for quick trips to the shops, appointments and catching up with friends. Ergonomic backrest and seat shape follow the contours of the user to maximise comfort and postural support. The 135kg safe working load caters to a broad range of users. Lightweight frame design ensures easy lifting in and out of cars, ideal for carers. Contoured and padded seating improves comfort and postural support. Attendant operated hand brakes with parking lock. Simple and intuitive folding for easy transportation. Removable leg rests and folding back for compact storage. Rear storage pocket for essentials. Available as attendant propelled or self-propelled. Anterior Seat Height - 495 mm Posterior Seat Height - 445 mm

Features:1. Fits wheelchair width of 36-51cm (14-20″)2. Twin drive wheels for greater traction3. Dismantles easily for easy transportation and storage4. Easy to operate hand control lever5. Variable speed setting with reverse6. Security key switch7. Removable battery pack for remote charging8. Lifts out of use to enable normal wheelchair function9. Suitable for users up to 136kg (21 stone) The unit is intended to be an aid to attendants or carers whilst pushing a wheelchair user. It is not designed as an accessory to enable a manual wheelchair perform as a power wheelchair.